single-beam crane

Product Description:

The LDA electric single beam crane is designed and manufactured according to the standard JB/T1306-1994, and is used in conjunction with CDI, MDI and other forms of electric hoists. It is a lightweight and small crane that operates on rails, with a suitable lifting capacity of 1-16t, a suitable span of 7.5-22.5m, a working level of A3-A5, and a working environment temperature range of -25-+40 ℃. This product is a general purpose crane, mainly used in places with low frequency of use or low rated lifting capacity lifting times such as mechanical manufacturing, assembly, and warehouses. Something: Short ordering cycle, cost-effective; Disadvantages: The effective lifting height is relatively low, the shaking during use is relatively large, the working level is low, and it is not suitable for heavy workshops. This crane is equipped with three types of control modes: bottom face, control room, and remote control. The control room also has two types of door opening modes: end face and side face, for users to choose from.

The specifications of this product are as follows:

(1) Ground manipulation

Example: Lifting capacity: 3t, span: 10.5m, lifting height: 6m, working level A3

Representation method: LD310.56DA3 

(2) Operating room control (separate control room KS and closed control room BS)

Example: Lifting capacity: 5t, span: 16m, lifting height: 6m, working level A3, open control room operation indication method: LD5T S16 H6 A3

This product is widely used for lifting goods in different occasions such as factories, warehouses, and material yards. It is prohibited to use it in environments with flammable, explosive, and corrosive media.

This product has two operation modes: ground and operation room. There are two types of control rooms: open and closed. They can be installed on the left or right side according to the actual situation. The entrance direction has two types: side and end, to meet the needs of users in various situations.

Specification table